A question we hear every day: "How much does a 1-ton jumbo bag cost?" The honest answer is that there is no fixed per-piece price — and any seller who quotes one without seeing your specifications is not being straight with you. Here is exactly what an FIBC price is built from, and how to get a fair, accurate quote.
What Is the Price Made Of?
The cost of each FIBC depends directly on the fabric weight used and the production steps involved. A standard 1-ton bag (e.g. 90×90×120 cm, 180 GSM, 5:1 safety factor) costs significantly less than a customized one with a liner, double filling spouts and reinforced loops.
Factors That Drive the Price
| Factor | Effect on Price |
|---|---|
| Fabric GSM | Higher GSM = more fabric = higher price (140–220 g typical) |
| Bag dimensions | Larger bags consume more fabric |
| Safety factor (SF) | 8:1 (high-risk / multi-trip) costs more than 5:1 |
| Top / bottom type | Filling and discharge spouts use more material than open tops |
| PE liner | Adding an inner moisture liner increases the price |
| Lifting loops | Standard 4-corner costs less than 8-loop reinforced |
| Custom printing | One-time plate fee + per-bag print cost |
| Order volume | Large orders noticeably reduce the unit price |
| Raw material prices | PP granule prices fluctuate and affect the final quote |
Why You Need a Same-Day Quote
Raw material prices in the plastics industry (PP granule) fluctuate like exchange rates. That is why FIBC prices change over time and only a current factory quote is reliable. Buying direct from the manufacturer means no middlemen — you get the producer's price.
How to Get the Most Accurate Quote
Send us these 5 details and receive an exact same-day price:
- Bag dimensions (L × W × H) — or just tell us the product weight and type
- Content weight (e.g. 1 ton) and product type
- Top and bottom closure (spout, open, discharge)
- Liner needed or not?
- Order quantity, and whether you need custom printing
Warning: Prices Far Below the Market
If a quote is dramatically lower than the others, check for: lower GSM than agreed, low-grade recycled material, a reduced safety factor, or plain stitching instead of reinforced. A cheap bag that tears halfway costs multiples of what you saved. When comparing quotes, always compare identical technical specifications.
FAQ
What is the minimum order for FIBC bags?
100 pieces. Larger volumes receive tiered discounts.
Does custom printing raise the price a lot?
The plate is a one-time cost and belongs to you; on future orders only the small per-bag print cost applies.
What is the delivery time?
After sample approval, the order enters production — with capacity up to 800 tons per month, lead time depends on order size.
Conclusion
The price of a 1-ton FIBC depends on GSM, dimensions, accessories (liner, spouts, loops), printing and order volume — and since raw materials fluctuate, only a same-day quote is valid. Fastest route: send the specs above on WhatsApp, get today's price, and see a sample before you buy.